Type of Resin
RADOPOL A300MC is a low-reactivity, high-viscosity unsaturated polyester resin based on orthophthalic acid.
Areas of Application
The resin is formulated to be used with the addition of inorganic fillers in casting processes. It can be used for the production of sanitary ware such as sinks, bathtubs, and similar products. It is characterized by low geometric deformation and is suitable for production processes with Respekta casting machines.
What You Buy
- Excellent filler wetting
- Physical – mechanical properties
- Stable gel time
- Production with incoming raw material control and finished product quality control
What You Get
- Adjusting the resin/filler ratio according to your own needs
- The resin contains an additive for filler wetting
- Excellent water resistance, good resistance to atmospheric influences, and good mechanical properties give the castings quality and durability
- Possibility to adjust the gel time within a wide time interval according to production needs
Resin Characteristics in Delivery Form
| Characteristic | Value | Method |
|---|---|---|
| Appearance | Clear to slightly opalescent without mechanical impurities | Visual |
| Color (Gardner Color Standard) | Max. 3 | ISO 4630 |
| Solid content % | 68±2 | ISO 3251 |
| Viscosity at 23°C mPas | 1100-1300 | HAAKE VT02 |
| Viscosity DIN6 23°C sec | 45-65 | DIN 53211 |
| Acid number mgKOH/g | 25-35 | ISO 3682 |
| Density at 20°C g/cm3 | 1.1±0.05 | ISO 2811 |
| Flash point °C | 34 | ISO 3679 |
Standard Packaging
- Metal drums with two plugs – 220 kg
- IBC container – 1100 kg
- Tanker truck – approx. 23000 kg
Storage Conditions
- SHELF LIFE: 6 months
- CONDITIONS: original packaging, indoor space without direct sunlight at temperatures up to 25°C
Disclaimer
These information are made based on laboratory tests and data obtained as a result of practical experience and serve only as application guidelines. The duty of the end user is to determine the suitability of the product for a specific purpose and to conduct quality control or substrate conditions and other factors that affect the application of the product. HEMPRO COLOR does not accept responsibility for losses, injuries, or damages that may result from improper use of the product.
FAQs
What is “gel time”?
Gel time, also known as gelling time, refers to the time it takes for the resin to transition from a liquid or viscous state to a gelled semi-solid state. Gel time depends on the type of resin used, as well as the surrounding conditions (temperature, humidity, etc.).
