Use: Disperol is an ecological product and is intended for the protection and decoration of internal wall surfaces made in concrete, brick, plasterand asbestos-cement corrugated sheets. It is distinguished by the excellent covering power, whiteness and resistance against washing. It is easy to apply and it has fine aeration properties, so it provides “breading” of walls.
Composition: Dispersion of synthetic polymers, pigments, fillers and additives.
Method of application: It can be applied in two layers with a brush, roller, or by spraying on prepared wall surfaces on which Primalin forimpregnation of the substrate had been applied. For the first layer dilutethe paint with water up to 30%, and for the second layer up to 10%.
Substrate preparation: New wall surfaces in plaster and concrete should mature more than 30 days and cleaned from dust and other dirtiness. From old wall surfaces, remove old and loose coats and crumbling parts by the use of a stripping knife and wire brush. Smooth down uneven surfaces with plaster of the same composition as the existing one.
Application temperature: It is best to work at temperatures from +5 °Cto +25 °C. Application at temperatures below +5 °C is not permitted.
Coverage: 1 lit. of Disperol paint can cover from 2 to 5 m2 of wall surface in two layers.
Shelf life: 1 year
Storage and care: S: 47/49. Should be kept only in the original containers at temperatures from + 5 °C to +25 °C.
Packaging: 4 kg, 10 kg, and 15 lit
Other products from the group of waterborne programme
|
